size 5 MB  / 8 MB

REALIZER is a transient based random value generator for parameters.

Great for static synths, samples, one-shot or multi-layered drums, fake doubled vocals and even recreate broken cassette player! It’s not limited. Your imagination is the only limit!

It has 5 randomized parameter. Gain, Transient, HPF, LPF and Pitch. Volume is standart output volume control. Not randomization. Simply, each parameter has its own range but not static. Always, triggered with random values by transients.

You can use each knob to set parameter “intensity”. So, you will be able to keep random values between “unknown” range. For example, if you set gain knob to %20, you will get unknown but narrow range. Same for others.

• 5 randomized parameters triggered by transient.
• Gain, Transient, HPF, LPF and Pitch.
• Each knob will set range for parameters. Narrow to wide.
• Volume knob is simple output knob.
• Touchscreen support.
• Resizable interface. Simple “Bottom Right Corner Handle” to resize. 50% to 200%.

AVAILABLE FORMATS:
– VST3 / AU / AAX Native – Audiosuite | Mac 10.11 – 13.X (Requires a graphics card that supports “Metal”).
– VST3 / AAX Native – Audiosuite | Windows 10 – 11.

http://analogobsession.com/

REALIZER_1.0  ( 5 MB )

REALIZER_1.0.MAC  ( 8 MB )

FetSnap is the most interesting transient enhancer. We already love famous Fet compressor, right? And FetSnap is based on this famous compressor! In digital world, we can fully modify any circuit according to our requirements. So, just played with Fet compressor’s circuit and made it transient enhancer. Think like reverse-compressor or expander but fixed attack/release and tons of harmonics!
FetSnap will enhance attack of your source and make it jump!
It’s really colorful and snappy enhancer for your drums and any percussive instruments.
But!
It’s also very useful for your any other tracks!
Need punchy bass guitar? Or “in your face” slaps? Use FetSnap!
Need aggressive vocals with enhanced transient? Use FetSnap!
Need funky and twangy guitars? Enhance your pick sound with FetSnap!
And many more options up to you!
Let me explain FetSnap controls. Really easy…
Two main controls for your transients. TONE and SNAP.
Snap is the most important control of this plugin. Simply, you can dial it up and enhance your attack. That simple!
Tone control will shape your transient’s tone. It’s kind of tilt equalizer.
Mix will blend your shaped transients with original source.
FET symbol is simple bypass button.
If you want to enhance your low end, simply set your Tone control to Dark side. Need high end transient? Set your Tone control to Bright side.
When you decide your tone of transients, now, time to dial up your Snap control. Set your Snap control according to your taste and rise up source’s attack!
If you happy with result, now, time to blend your enhanced attack with original source.

http://www.analogobsession.com/

FetSnap_1.0_VST_WIN  ( 11 MB )

FetSnap_1.0_VST_MAC  ( 11 MB )

FetSnap_1.0_AU_MAC  ( 6 MB )

size 7 MB

Fleeter is a transient processor / saturator designed to fatten up drums.

It has only three simple knobs: Time, Amount, and Saturation.

Time corresponds to how long a transient is. Amount corresponds to how much or little the plugin should emphasize a transient. Saturation adds analog charm to the track and creates upwards harmonics.

snfkmusic.com/

Fleeter  ( 7 MB )

Transient is an envelope shaper.

Increase the attack of a snare, highlight picking on an acoustic guitar or smash a drum room. Use the x2 switch to double the intensity of the effect.

http://www.audio-assault.com/

Transient  ( 1.95 MB )

transient-mac  ( 8.61 MB )

Transient is a transient-driven signal shaper that allows you to adjust the attack and sustain portions of the peaks in your audio signal.
It works by detecting rapid changes in the incoming signal regardless of its amplitude level. Enhance your percussive instruments with this easy to use envelope shaper. Transient allows precise control over your audio signal’s transients with minimal cpu usage.

• Mono and Stereo compatibility.
• Transient detection and volume processing.
• Manual timing adjustment for transient detection and processing.
• Adjustable filters for transient detection and processing.
• External sidechain inputs.
• Solo attack, sustain, left, and right.
• Adjustable volume range for transient detection.

Transient 1 ( 2.18 MB )

Transient_x64  ( 2.22 MB )

ATKTransientSplitter is a mono transient splitter, cutting an input signal into its transient and sustain parts.
The plugin follows the implementation of the transient shaper with a twist explained on Audio Toolkit blog. The parameters are:

• RMS is the size of the power windows.
• Attack is the attack time constant for the slow attack/release filter.
• Attack fraction (or ratio) is the percentage of the attack time constant that will be used for the fast attack/release filter. Used to work on the transient at the beginning of a sound.
• Release is the release time constraint for the fast attack/release filter (as the release time has to be higher).
• Release fraction (or ratio) is the percentage of the release time constant that will be used for the slow attack/release filter (as it has a faster release time constant). Used to work on the transient at the end of sound.
• Threshold.
• Slope is the ratio, 1 keeping the sustain at a constant RMS above the threshold, higher means that the sustain will be reduced by this factor (swell-like behavior).
• Softness is an indicator of the harshness of the knee of the underlying swell.

ATKTransientSplitter  ( 0.95 MB )

ATKTransientSplitter-x64  ( 1.04 MB )

ATKTransientSplitter.component  ( 0.47 MB )

ATKTransientSplitter_MacVST  ( 0.94 MB )