size 69 MB

Audio plugin for spatial processing YS – PseudoStereo plugin allows a mono or stereo source to add a stereo delay at any frequency of the six crossover bands, thereby giving each instrument in the mix its own specific perception of volume that does not interfere with others.

The random inclusion function,the volume of each of the bands within +, – 3 dB will help to quickly change and form a tone that distinguishes similar instruments. You can also randomly switch the delay and volume of the delay, which will help to easily select the desired space of presence for the instruments and manually adjust if you need a slight correction.

The plugin is fully mono-compatible, delays when switching to mono are subtracted in antiphase. To avoid excessive falling out of phase, the expansion on the bands is limited to 90 degrees (the mono signal is equal to the stereo signal in the extreme right position).

If you need to add more width, the general “WIDE” regulator will add the volume of the side channels – Side at the plugin output.

https://www.facebook.com/Yriisem

YS-PseudoStereo_v_1,01  ( 69 MB )

size 36 MB  / 27 MB

• Widen or narrow the stereo field.
• Convert mono sound to stereo (state of the art method, with no delay and no sound coloration)
• Bass focus parameter, to increase the stereo widening while keeping the low frequencies mono.
• Pan, out gain, and mono output parameters.
• Five display modes (polar samples, Lissajous…)
• Correlation meter, to check mono compatibility when increasing the stereo width.

bluelab-plugs.com/

BL-StereoWidth-v5.3.1-win  (  MB )

BL-StereoWidth-v5.3.1-mac  (  MB )

The Stereo Studio counts 4 stereo tools.

• Auto-Pan (auto-pan LFO).
• DualPan (left/right auto-pan LFO).
• Pseudostereo (pseudo spreading effect).
• Ztereo (mid/side and stereo spreading tool).

ATTENTION: you might need to install “Microsoft Visual C++ 2015/2017 Redistributable”.

https://www.beatassist.eu/

Stereo-Studio  ( 24.5 MB )

Stereo-Studio_x64  (  15.7MB )

Midinaut Filta is a parallel stereo filter.

• Parallel stereo filter (lowpass & hipass) with resonance.
• Stereo-LFO for each filter.
• VST3.

http://www.midinaut.de/

Filta  ( 2.6 MB )

Stereo Swapper is a stereo image utility plugin that can help make better mix decisions.
Stereo Swapper quicky “swaps” the left and right channels in any stereo monitor bus, mix bus or stereo track to allow a new perspective of the stereo image when flipped left/right.
Stereo Swapper also includes a Mono button for quick referencing of the track in mono.

https://www.raisingjakestudios.com/

StereoSwapperv_x64PC  ( 1 MB )

StereoSwapper_Mac  ( 2.3 MB )

size 5 MB  / 4 MB  / 2 MB

Stereo controls the stereo enhancer for the master channel.

It has individual low-cut filter for center and side signals and a shelf equalizer for tuning frequencies below 650Hz for side channels without affecting the central one, it well frees the center from excess low frequencies, also, with a poor low middle, it will add energy to this frequency range and create a good “enveloping” volume effect.

https://www.facebook.com/yriisem

Yuri-Semenov-Stereo-WINx32  ( 5 MB )

Yuri-Semenov-Stereo-WINx64  ( 4 MB )

Yuri-Semenov-Stereo-MAC_AUx64  ( 2 MB )

ATKStereoUniversalDelay is a dual stereo delay plugin based on the Audio ToolKit.

ATKStereoUniversalDelay ( 0.94 MB )

ATKStereoUniversalDelay_x64  ( 0.98 MB )

ATKStereoUniversalDelay_MacAU ( 0.89 MB )

ATKStereoUniversalDelay_MacVST  ( 1.87 MB )