size 31 MB

Spacelifter 4 represents the next chapter in the evolution of our modular space effect, bringing a big, dramatic echo-reverb sound. It combines three well-known 3D spacing modules:

Width module with aggressive tails.
Height module with shimmer touch.
Echo module.
Master modulation effects (Includes modulation effects applied to a given frequency range, ping pong, side-chaining, and LFO).

The aditional key features

Frequency range module – Acts as a “wet EQ,” passing the wet signal at specific frequency values only.

LFO module – Based on five motion engines, it can create constant vibrations or gated effects, depending on the added effect amount. You can sync it to the host’s BPM or manually adjust the speed.

Ping pong module – A panning effect based on two motion techniques: constant (“in motion” mode) and immediate (“immediate” mode). Sync it to the host’s BPM for increased or decreased movement or an immediate jump between panning points.

Side-chaining module – Allows ducking between the dry signal and the wet signal on a frequency basis. Each of the nine drawbars represents a frequency range; pushing a drawbar down ducks the wet signal in that range.

Special thanks to our friend Rex Basterfield for his phenomenal contribution to this project

spacelifter4

Spacelifter4  ( 31 MB )

size 3 MB

Vibanez EM-V is a sound-a-like of the Ibanez EM-5 Echo Machine effect pedal.  

This VST3 effect plugin is designed to emulate the original pedal design, staying faithful to the original signal chain and theory of operation.

There are four controls: Echo (delay effect level), Repeat (feedback), and Speed (delay time), and of course the “footswitch”. 

n/a

Vibanez_EM-V_v1  ( 3 MB )

size  76 MB  / 25 MB

Baby Comeback is a delay / ducker.

It offers a stripped-down version of our award-winning Comeback Kid delay/echo plugin.

The plugin includes an on-board ducker as well as four wet signal flavors: Wide, Analog, Saucey and Cheap.

babyaud.io/

BABY-Audio-BabyComeback_PC  ( 76 MB )

BABY-Audio-BabyComeback_Mac  ( 25 MB )

size 9 MB  / 11 MB

Spacelifter 3 is a modular space effect producing ducking reverb / echo.

• The frequency range module – The frequency range module functions as a “wet EQ”. It would pass wet signal at the determined frequency values only.
• The LFO module – The modulation effect is based on 5 motion engines. It can create a constant vibration or a gated one, depended on the amount of the added effect. It can be synced to the host’s BPM or either played in manual speed.
• The ping pong module – The pingpong module is panning effect based on 2 motion techniques: constant (“in motion” mode) and Immediate (“immediate” mode). It can be synced to the host’s BPM and create increaseddecreased movement or immediate jump from one panning point to another.
• The side-chaining module – The side-chaining module allows the ducking effect between the dry signal and the wet signal on frequency basis. Each of the 9 drawbars represents a frequency range an by pushing the drawbar down, the wet signal will be ducked at that frequency range.

fananteampro.com/

Spacelifter3  ( 9 MB )

Spacelifter3_x64  ( 11 MB )

size 2 MB

GRECHO is a granular echo device with unusual behaviour and sound.

flowstoners.com/quilcom

Quilcom-GRECHO_Win32  ( 2 MB )

size 1.4 MB  / 1.8 MB  / 2 MB  / 3 MB

Flying Delay allows you to repeat the input signal periodically like an echo.

Thanks to the Tape slider you can rise the spirit of an analog Tape delay. It also offers two filters lowpass and highpass (12dB/Octave) . As well as the essential ping-pong mode.

As usual with the Flying series it is possible to synchronize to the host tempo.

superflydsp.com

FlyingDelay_Win32  ( 1 MB )

FlyingDelay_Win64  ( 1 MB )

FlyingDelay_MacOS  ( 2 MB )

FlyingDelay_Linux  ( 3 MB )