45 MB

An audio mixing plugin for Windows only (there is no compatible impulse loader module for MacOS). YS – PreAmp-IR allows you to load impulse responses from various microphones, tape recorders, and other equipment to simulate analog devices. Two IR loaders are connected in parallel by default, with the output of a third IR mixing them. Impulse loaders can be loaded from any directory on your drives.

After loading, save the preset for quick access the next time you insert the plugin. If the controls are not displayed due to a weak graphics card, replace the images in the root of the plugin folder with a smaller renderer from the “Knob to change” Knob 51 archive. By default, all controls are set to smoothly switch at frame 101. If you have issues with VST3 in some DAWs on Windows, try VST2. For fine-tuning, hold down the Ctrl key.

Visit Developer Site

YS_PreAmp-IR_v1.0.0  ( 45 MB )

12 MB

YS – Console AMP An audio plug-in for inserting into each track in a DAW to simulate an analog mixer console, to add color to each channel with slight differences in processing.

Harmonics and dynamic noise are added parallel to the main signal. In Linear Input mode, saturation is insignificant compared to Mic Input mode.

For a greater difference between channels, you can turn on the mode that adds a comb filter. The “Random” button randomly switches the saturation, noise and filter settings for the left and right channels.

Visit Developer Site

YS_-_Console_AMP_v_1.0.0  ( 12 MB )

13.7 MB

YS – Phantasm Analogue Enhancer adds harmonic richness to your sound.
The richness is added parallel to the main signal and divided into three bands by an adjustable crossover.
The bass and low midrange add even harmonics, adding body.

The midrange adds even and odd harmonics and enhances clarity in this range for vocals and lead instruments.
In the high range, odd harmonics are added, adding clarity and brightness to the sound.
All harmonics can be auditioned without the main signal to fine-tune the desired color.
Tone EQ creates a brighter or warmer overall tone.

The midrange can be attenuated, creating the characteristic notch typical of passive equalizers. It also creates subtle volume differences between the center and side channels, enhancing the psychoacoustic stereo effect. The “Bass” button adds 3dB at 50Hz to the center channel and attenuates this frequency by 3dB in the side channels.
‘Flow’ creates subtle vibrations between the channels, matching the project’s tempo in even harmonics, adding volume in the low range.

‘Flux’ simulates the movement of a tape recorder.

The plugin was created using SynthEdit.

(Universal VST3 plugins can run on both macOS and Windows. SynthEdit now produces universal VST3 plugins. This means you can offer the same download file to macOS and Windows users. It will “just work.” SynthEdit universal VST3 plugins support both Intel-based Macs and Apple Silicon (ARM) machines such as M1, M2, and later models.)

Visit Developer Site

YS.Phantasm.1.0.1  ( 13 MB )

60 mb

An audio plugin for mixing. YS – Summing is designed to be inserted into each instrument track at the very beginning of your plugin chain to simulate the input amplifiers of an analog console. The “Random” button randomly selects EQ settings to add tonal variety to each track.

The changes are subtle, but they give the overall mix a more “live” sound. You can also add light parallel compression to thicken and glue the mix. Update v.1.0.1 adds a DC low-pass filter button – 10-30 Hz. YS – Sum-Gtr Bus can be used on both instrument stereo tracks and buses.

Processing occurs in Mid-Side mode, which can add depth to the sound. The range of the difference between channels is plus or minus 2.5 dB = 5 dB. The low-pass filters are configured to leave the lowest frequencies in mono. Light compression with adjustable compression ratio, not parallel. Attack and release selection via a button with two fixed settings. 1_ Attack 3 ms, Release 70 ms. 2_ Attack 10 ms, Release 120 ms.

Visit Developer Site

YS_Summing_Gtr_v1.0.1_WIN  ( 25 MB )

YS_Summing_Gtr_v1.0.1_MAC  ( 35 MB )

61 MB

Analog-Modeled Sub-Bass
Designed for low-frequency sources such as bass, sub-bass, 808s, and drum buses, this plugin delivers an authentic analog feel without any digital harshness.

Saturation
Measurement-based modeling of real 12AU7 tube behavior. Specially tuned for temperature and depth at lower frequencies. Aliasing is prevented through oversampling, ensuring clean harmonic production. Provides saturation without damaging higher frequencies. We can say that it is the best modeled low frequency saturation character in the world.

Equalizer
Provides precise control over sub-bass without muddying the mix. Balances analog warmth with digital clarity for clean low-end shaping. Optimized for 808s, bass guitars, and synths. Includes a tube indicator that lights up when saturation is active.

Visit Developer Site

LUX-Sub-Bass  ( 58 MB )

Lux-Sub-Bass-Mac  ( 19 MB )

32 MB

MidBoss is mid-frequency targeted saturator and sweetener with 6 different types!

While it mostly saturate mid-frequencies, it will shape high-end or low-end response according to selected type.

FEATURES

– Type : 6 different types for different sounds

– DRIVE : It will shape and saturate signal

– MIX : It will blend processed and processed signal

– OUT : +/- 15dB clean output (Screw adjust)

– I/O : Bypass

Resizable interface. Simple “Bottom Right Corner Handle” to resize. 50% to 200%.

*Resizing Tip: When you duplicate plug-in, it will remember current state of GUI size. But if you load new instance, it will be opened at default size. To get rid of this issue, simply follow these steps;

1. Open plug-in for the first time

2. Resize GUI according to your screen resolution or you liking before setting any knobs

3. Save this state as default preset with your DAW

Now, you will be able to load new instances with same size.

(If you want to go default size, simply double click to resize handle.)

Version 1.0 – 20.10.2025

– Initial Release

Available Formats

VST3 / AU / AAX Native – Audiosuite | Mac 10.11 or Higher | Intel / Apple Silicon

VST3 / AAX Native – Audiosuite | Windows 10 – 11

Mac Versions require a graphic card that supports “Metal”

Windows Versions require a graphic card that supports “OpenGL”

Visit Developer Site

MidBoss_1.0_WIN  ( 19 MB )

MidBoss_1.0_MAC  ( 19 MB )

10.9 MB

A new plugin has joined the XM family!

XMTubePre is now by your side to give you the warmth you’ve been looking for.
What makes it special is that—just like the other members of the XM family—it makes you feel as if you’ve purchased an expensive piece of hardware.

It was designed to be transparent, just like the other XM plugins.
However, it is now also suitable for use in the mixing stage.
You can push it further and even use it as an effective creative tool!

And of course, as always, it is completely FREE!

HOME

XMTubePre_05.12.2025_WIN  ( 5 MB )

XMTubePre_05.12.2025_MAC  ( 11 MB )

7 MB

ChannnelStrip is a modeled tube preamp with 3 band EQ and oscilloscope available in VST3 and CLAP plugin formats.

Controlling dynamics with saturation is an often overlooked technique in music production. ChannelStrip is intended as an end-of-chain effect giving you smooth modeled tube saturation combined with an oscilloscope to monitor how the waveform is compressed. The integrated 3-band equalizer will furthermore help you apply gentle, unobtrusive tone-shaping.

Even as a simple distortion effect or equalizer, ChannelStrip will make a great addition to Ableton’s stock plugins.

Features:
Oversampled modeled tube saturation with character control
Gentle 3-band equalizer
Oscilloscope with adjustable sample-size

Available in VST3 and CLAP format for 64bit Mac/Win/Linux systems.

HOME

ChannelStrip-v2.0.3  ( 6 MB )

39 MB

An audio plugin for mixing. YS – Summing is designed to be inserted into each instrument track at the very beginning of your plugin chain to simulate the input amps of an analog console.

The “Random” button randomly selects EQ settings to add tonal variety to each track. The changes are minor, but they give the overall mix a more “live” sound perception. You can also add light parallel compression to thicken and glue the mix.

HOME

YS_Summing_v1.0.0_WIN  ( 17 MB )

YS_Summing_v1.0.0_MAC  ( 23 MB )

131 MB

Following the success of its predecessor, PULSE, Lancaster Audio is back with PULSE 2 – the perfect IR loader to complement our extensive library of impulse responses. Using PULSE 2 as your IR loader means you can spend less time sorting through piles of IRs and more time focusing on what’s important: the mix.

PULSE 2 was built in collaboration with Aurora DSP and designed for both aspiring engineers and seasoned pros to utilize impulse responses to their fullest potential. With its unique and incredibly intuitive blending control, PULSE 2 not only allows you to find that perfect ‘Goldie Locks’ sound with ease but the ability to export it as your very own impulse response .wav file!

Best of all, when you open PULSE 2, you’ll be greeted by four impulse responses, hand-selected from our Lancaster Audio Producer Packs—for FREE. Get your perfect guitar sound quicker than ever before.

Features:
• Multi-platform
• Four IR inserts
• Expandable EQ Control
• Real-time Sample Rate Conversion
• Compatible With 3rd Party IR’s
• Unique Blend Control
• HP/LP Filters
• Four Producer IR’s
• Auto Align
• Export Mixed IR’s

HOME

Pulse_2_IR_Loader  (  MB )