80 MB

MIDI Printer: Generate Endless Melody Ideas in Seconds

Cymatics MIDI Printer composes an endless stream of original 8-bar MIDI compositions in the exact genre and key you’re working in, so you never stare at a blank piano roll again.

A Fresh Idea Every Time You Hit Print
MIDI Printer composes an endless stream of original 8-bar MIDI compositions in the exact genre and key you’re working in. Every print is a brand new composition, crafted on the spot from the songwriting DNA of Cymatics’ top melody creators.

With built-in originality protection, it guarantees you’re never handed a repeated composition.

Preview instantly with the built-in player, flip through your print history, save your favorites, nudge the octave, and drag the winner into your DAW in seconds.

How does MIDI Printer work exactly?
Never start with a blank piano roll again. MIDI Printer composes an endless stream of original 8-bar melodies, chords, and progressions in the exact genre and key you’re working in: one button, instant results, drag straight into your project.

Every print is a brand new composition built from the musical DNA of over a thousand professionally written Cymatics ideas, so it sounds written, not randomized.

Built-in originality protection guarantees it never hands you a repeated composition.

Preview instantly with the built-in player, flip through your print history, nudge the octave, and drag the winner into your DAW. From “I need an idea” to “I’m producing” in under ten seconds.

Visit Developer Site

Cymatics.MIDI.Printer.1.0.0  ( 81 MB )

50 MB

MIDI Shredder Plugin Instantly Convert Audio into MIDI Notes in Seconds

Shred Any Audio Into MIDI Notes with 1 Click and Drag
MIDI Shredder is a creative utility plugin that instantly converts any audio into playable MIDI, all through the look and feel of an office paper shredder.

Just drag an audio file directly into the top of the machine and watch it get “shredded” into MIDI notes in real time, transforming melodies, vocals, basslines, guitar riffs, and samples into MIDI compositions you can completely reshape.

Whether you’re extracting inspiration from loops, rebuilding melodies from old ideas, finding basslines or generating instant starting points for new songs, MIDI Shredder turns audio into usable MIDI in seconds with a workflow that’s surprisingly addictive.

How does MIDI Shredder work exactly?
Drop any audio file into the shredder slot and MIDI Shredder automatically analyzes the pitch information inside your sound.

As the file feeds through the machine, the audio visually transforms into shredded MIDI note strips that spill out into the collection bin below, ready to drag directly into your DAW’s piano roll.

Use it to recover chords from samples, turn vocals into synth leads, convert guitar ideas into MIDI instruments, or completely reinterpret existing audio into something brand new.

It’s fast, satisfying, and one of those tools that instantly sparks new ideas the second you start throwing sounds into it.

Visit Developer Site

Cymatics.MIDI.Shredder.1.1.0  ( 50 MB )

8.08 MB

MIDI Generator for Electronic Music Producers. Generate melodies, basslines, chord progressions, and arpeggios instantly for Techno, Trance, Psytrance, Drum & Bass, House, and other electronic music genres.

Features
🎼 MIDI Generation
– Generate Melodies, Basslines, Chords & Arpeggios
– 10 Electronic Music Genres
– 50+ Production-Ready Presets
– Harmonic Timeline with genre-aware chord progressions
– Melody, Bassline & Arpeggio follow the active chord of each bar
– Style Variants (Profiles A–H) for every preset
– Phrase-Aware Musical Generation
– Scale-Aware Generation
– Beat & Scale Degree Weighting
– Smarter Harmonic Resolution
– Dissonance Budget for more musical note choices
– Duration Profiles per genre (Techno, House, Trance, DnB, Ambient, Cinematic…)
– Phrase Extensions for more natural loop endings
– Improved Chord Generation with automatic validation and safe fallback
– Pitch Variety Enhancement
– Melodic Gravity for More Natural Phrases

🎛 Creative Controls
– Groove Templates (Straight, Swing, House, DnB & more)
– Melodic Contours (Arch, Ascend, Descend, Plateau & Valley)
– Tension Macro for Instant Energy Control
– Deterministic Seed System
– Recreate & Share Ideas with Seeds
– One-Click Random Inspiration

🎹 Piano Roll & History
– Editable MIDI Piano Roll
– Real-Time Pattern Editing
– Manual Edit Protection
– NEW: History Panel
– Save up to 20 favorite patterns
– Pattern labels
– Mini MIDI previews
– Play / Stop saved patterns
– Drag & Drop directly from History
– Edit saved patterns
– Delete saved patterns
– History automatically saved inside your DAW project

🔊 Audio Preview
– Built-in Audio Preview
– Genre & Role-Based Preview Instruments
– Dedicated sounds for Melody, Bassline, Chords & Arpeggio
– Improved stereo width and detuned synth sounds
– Voice-specific EQ
– 32-voice preview engine
– Reverb & Limiter
– Host-Synced Playback & Metronome

🚀 Workflow
– MIDI Drag & Drop Export
– Lightweight CPU Usage
– Windows & macOS Support
– Free Download

Visit Developer Site

ABYZOR.Genesis.1.7.0  ( 8 MB )

18.6 MB

Gliff is a MIDI effect for turning incoming notes into guitar-aware chord information and clean polyphonic MIDI. Put it on a MIDI track, play from a keyboard, MIDI guitar, DAW clip, or the on-screen fretboard, and it names the chord while showing a playable fretboard shape.

The important distinction is that Gliff is not an audio-to-MIDI converter. It does not listen to a recorded guitar signal; instead, it translates MIDI note data into guitar voicings, inversions, slash-chord interpretations, and output that can be dragged back into a DAW clip.

That makes it useful when you already know the harmony but want it to behave more like something a guitarist could play. Alternate tunings, custom tunings, capo modeling, real-time chord naming, and a one-bar MIDI drag workflow make it a compact helper for producers sketching guitar-like parts, guitarists using MIDI hardware, and keyboardists who need better fretboard logic inside a normal writing session.

Key Features
– Names held MIDI chords in real time, including slash chords, inversions, and partial matches.
– Shows incoming harmony as both a fretboard shape and a piano view for quick translation between instruments.
– Writes clean polyphonic MIDI output that can be routed to other instruments in the DAW.
– Lets users click the on-screen fretboard to audition voicings through the plugin’s MIDI output.
– Supports drag-and-drop of a one-bar MIDI clip from the plugin into the DAW timeline.
– Includes built-in standard, drop, DADGAD, open, ukulele, custom tuning, and capo options.
– Ships as macOS VST3/AU, Windows VST3, and a Max for Live device for Ableton Suite.

Visit Developer Site

gliff.1.5.0  ( 12 MB )

5.58 MB

Parallel Sequence Engine. This plugin mixes the best properties of an arpeggiator and a multitrack sequencer by allowing you to trigger up to five independent parallel sequences. Each sequence loops over one bar in the host’s tempo, but it starts when the assigned MIDI note starts and loops as long as it is held.

MIDI Note management is exactly as would be with an arpeggiator. First incoming note routes to the first sequence module, second note to the second, and so on. And just like an arpeggiator, notes that you release will force a re-assignment.

Example: Incoming notes C3, E3, G3
C3 plays in the first sequence, E3 in the second, G3 in the third. E3 is released. Now G3 plays in the second sequence.

Each sequence module’s steps can be freely set between 1 and 32. This allows for polyrhythms. Each step of each sequence has independent settings for MIDI channel, velocity and gate length parameters.

Everything can be tweaked at runtime, allowing experimentation.

Usage:
– Left click on a step to switch a step on or off.
– Right click on a step to switch parameter editing on or off.
– Left click and hold on a control to change value.

Visit Developer Site

Plexum.1.2.0.0  ( 5 MB )

14.7 MB

Audio-to-MIDI Transcription Plugin. You play or sing something — it listens, analyses the audio, and converts it into clean MIDI notes that you can use in your DAW.

Drop in a guitar recording, a piano melody, a vocal line, a bass riff, or even a full instrument — Semedo Notes figures out which notes were played, when they started, how long they lasted, and how loud they were. It turns all of that into a MIDI file you can drag straight into your project.

No keyboard skills needed. No MIDI controller needed. Just play or sing.

AUDIO TO MIDI — THE CORE
Drop any audio file onto the plugin — WAV, AIFF, FLAC, MP3 or OGG — and Semedo Notes analyses it and produces a full MIDI transcription in seconds. It works on single instruments: guitar, piano, bass, voice, strings, flute, synth lead — any source where individual notes can be identified.

LIVE RECORDING
Hit the REC button while your DAW is running. Semedo Notes captures your live input — microphone or instrument — for up to 2 minutes and transcribes it the moment you stop. No need to bounce to a file first.

GHOST NOTE FILTER (unique to Semedo Notes)
This is what sets Semedo Notes apart from similar tools. Every AI pitch detector generates false notes — overtones, room noise, bleed, and artefacts that appear in the MIDI as notes that were never actually played.

The Ghost Filter automatically removes these:
– It detects and removes octave overtones (harmonics that sound above the real note but were not played independently).
– It removes low-confidence notes that are too quiet relative to the real notes in the same moment.
– It enforces a polyphony limit so chords stay clean instead of turning into a wall of unwanted extra voices.

The result is MIDI you can actually use without spending an hour deleting wrong notes by hand.

PURITY CONTROL
A single knob controls how aggressively the plugin cleans up the result. Turn it down to keep everything the model detected. Turn it up to keep only the notes the plugin is most confident about. You stay in control of the balance between completeness and cleanliness.

PITCH BEND / EXPRESSION EXPORT
Semedo Notes detects the micro-pitch movement in your playing — vibrato, slides, bends — and can write that expression into the MIDI file.

Three modes:
– Off — flat MIDI notes, works with every instrument.
– Mono safe — adds pitch bend for single-note lines where bends cannot conflict with each other.
– Per-note MPE — each note gets its own MIDI channel and its own pitch wheel. Perfect for MPE-capable instruments like Serum, Pigments, ROLI instruments, and MPE-aware samplers. The MIDI file declares a proper

MPE lower zone so it plays back correctly without manual setup. Bend range: ±2, ±12 or ±24 semitones, written into the MIDI via RPN messages so the receiving instrument knows how to interpret the data.

TIME QUANTIZE
Align the transcribed notes to your project’s tempo grid automatically. Semedo Notes reads the BPM directly from your DAW — no manual entry needed while a project is open. Choose your grid (1/4, 1/8, 1/16, 1/32, triplets) and set how strongly the notes snap to it: 0 leaves timing completely raw, 1 locks everything to the grid. If no DAW tempo is available (standalone use or imported files), a manual BPM fallback is available.

SCALE FILTER
Constrain transcribed notes to a musical scale. Choose any root note and scale type: Major, Minor, Dorian, Mixolydian, Lydian, Phrygian, Locrian, Blues minor, Minor pentatonic, Major pentatonic, Melodic minor, Harmonic minor, Harmonic major — 14 scales in total. Notes that fall outside the chosen scale are removed, not moved. Semedo Notes never invents notes or shifts pitches to force a result.

NOTE RANGE FILTER
Set a minimum and maximum MIDI note to ignore anything outside the range you care about. Useful for filtering out low-frequency noise that gets transcribed as bass notes, or keeping only the range of a specific instrument.

MIDI DRAG AND DROP
When the transcription is ready, drag the MIDI clip directly from the plugin into a MIDI track in your DAW. No export dialog, no file browser — just grab and drop it where you need it.

MIDI EXPORT
Save the clean MIDI to a file at any point. The export button opens a standard save dialog. The exported file includes the correct tempo, note velocities, pitch bend data (if enabled), and RPN messages for MPE receivers.

MIDI OUTPUT
Semedo Notes sends its MIDI output to your DAW in real time. Route the plugin’s MIDI to any instrument track and preview the transcription through any sound you like.

BUILT-IN PREVIEW INSTRUMENT
A lightweight built-in synthesiser lets you hear the transcription inside the plugin without any additional routing. 32 voices, clean sine wave with smooth attack and release, soft limiter to prevent clipping. When MPE is active, pitch bends are played back correctly per voice in the preview too.

WAVEFORM DISPLAY
The original audio waveform is displayed above the piano roll so you can see exactly which notes correspond to which part of the recording. The waveform stays aligned with the notes and the playback head as you zoom and scroll.

PIANO ROLL
A full piano roll shows all transcribed notes with velocity shading — louder notes appear brighter. Zoom in and out with the mouse wheel. The playhead moves in real time during preview playback.

RE-ANALYSE FROM ORIGINAL
The original audio is kept in memory after transcription. If you change the Detection Confidence or other model parameters, Semedo Notes can re-run the full analysis from the original recording without you having to drop the file again or re-record.

LOW CPU USAGE
All heavy processing — audio loading, resampling, AI inference — runs on a background thread. The audio thread does no analysis work, no memory allocation, and holds no locks. Your DAW stays responsive and dropout-free while Semedo Notes works.

SAFE DURING PLAYBACK
Semedo Notes never interrupts your DAW’s audio output. Analysis runs in the background. Results appear in the piano roll when ready. You can keep playing and recording in your project the whole time.

Visit Developer Site

SemNotes.1.0.17  ( 14 MB )

5 MB

This is a tool that allows you to change the sound timing of drums you have created by playing them back and forth.

The pronunciation timing fluctuates according to the pitch and velocity settings of the MIDI signal,

Bass drums are pronounced earlier only when they become stronger.

– The hi-hat is pronounced slower only when it becomes weaker.

– The snare is always pronounced a little slower.

Grooves can be adjusted without manually fine-tuning MIDI tracks.

– Even if quantization is performed by changing swing values, etc.,

4D pocket groove designer can maintain displacement and randomization.

– Because it functions without moving the sound position on the sequencer,

the first note of a beat is pronounced a little before the beat. This makes it easy to edit drum tracks in which the first note of the beat is pronounced a little before the beat.

The goal is to make drums groove more naturally without manual MIDI editing.

Only Tested in Windows Studio One (May not work properly in other DAWs and Mac OS)

Visit Developer Site

4D_pocket_groove_designer  ( 5 MB )

8 MB

Stable Arpeggiator VST

Most random arpeggiators do not give you the same pattern every time through.
This one does.

You can get it to randomize the velocity and gate as well. Those patterns will also be stable.

Two other sets of algorithms are available:

Linear – Up, Down, Zigzag
Spiral – In, Out, InOut, OutIn

HOME

solidArp-V0.3.0  ( 8 MB )

261 MB

Blue Cat’s Freeceiver is a free plug-in and application that can receive audio or MIDI streams sent over the network by Blue Cat’s Connector and Fader Hub in real time.

Working with remote clients? You can send them audio and MIDI in real-time from your DAW without the need for them to acquire a license to our software. Freeceiver is 100% free, like all our free software! Jamming with friends, recording a session or playing a live gig with Fader Hub? Get listeners connected for free with Freeceiver!

Available both as a plug-in and application, it lets you either stream and record into your favorite DAW, or simply play the stream straight into your speakers or headphones on whatever machine that is connected to the network. It is as simple as that!

You can also use it locally on the same machine as Connector or Fader Hub to stream audio from one application to another.

Blue Cat Audio Standards:
Available as a standalone application and in most plug-in formats for Mac and Windows.
Full MIDI control and automation support, MIDI Learn.
No CPU load on idle: processing shuts down when fed with silence (optimal CPU usage).
Customizable user interface with transparency & zoom.
Smooth Bypass: noiseless plug-in activation / deactivation.
Undo/Redo.
Full featured integrated presets manager.
Copy/paste the state of the plug-in between instances.
Any sample rate supported.

Main Features:
Free Network Audio and MIDI client application and plug-in (available in VST, VST3, AAX or Audio Unit formats).
Fully compatible with Blue Cat’s Fader Hub and Connector.
Receives both audio and MIDI from the network or on a local machine.
Minimal latency, with full control over buffering.
Supports multiple sampling rates on a single connection (built-in resampling).
Built-in drift compensation.
UPnP support for automatic Internet router configuration.

HOME

BlueCatFreeceiver-v1.2  ( 261 MB )

44 MB

Unite Your Controllers

A virtual MIDI merger tool to combine a selection of MIDI controller inputs into a single virtual MIDI port. Managed by the Nextmidi Hub running in the system tray, all selected inputs will be mirrored and combined onto the Nextmidi Merger Port which can be selected as a distinct single input in the DAW.

This free utility allows you to combine your MIDI Controllers into a single virtual MIDI Port.
The data from your selected controllers is combined and available as a single input in your DAW

Easy Access
The Merger Port is managed by the Nextmidi Hub, which runs in your system tray. Activate the port and select your devices with only a few clicks.

Available for
Windows 10 and above
MacOS 10.14 and above

https://divisimate.com/free/

Nextmidi_Merger_Port_1.1.2  ( 44 MB )