63.3 MB

True-Peak Mastering Limiter. Trim up, check the meter, trim again. Volume Dealer removes the iteration. It measures your integrated LUFS as you listen, and when you click Set Level it applies the exact corrective gain in one step. No arithmetic, no back-and-forth. What you see while it measures matters too. Integrated, momentary, and short-term LUFS update in real time alongside gain applied, gain reduction, output peak, and latency – every data point you need to make a confident decision before you commit. The true-peak lookahead limiter holds the brickwall ceiling throughout, with optional 2x oversampling to catch inter-sample peaks that slip through at native sample rate.

Features:
– Measures integrated LUFS in real-time and applies exact corrective gain with one click
– True-peak lookahead limiter with optional 2x oversampling for inter-sample peak detection
– Full BS.1770 LUFS metering suite including integrated, momentary, and short-term LUFS
– Adjustable soft knee via Edge Rounding for less aggressive limiting on dense material
– Dual analog-style VU meters and dithering options for bit-depth conversion
– Input Trim and True Bypass for flexible mastering control

Visit Developer Site

Volume.Dealer.1.0.0  ( 63 MB )

30.4 MB

Clipper & Limiter. Ceiling Fan was born out of the desire to create extremely loud and distorted music that somehow still sounded clean and High-Quality. A bit weird, right? This plugin sounds great, try it out for yourself.

Includes:
– Ceiling Knob that controls how loud the sounds can go (in dBFS)
– Drive Knob for pleasant saturation
– Color Knob for subtle coloring for the high and low end (bright and dark)
– Output to scale after the effect is applied
– Built-in oversampling at 8x to make sure that sound is pristine
– Visual Meters that represent input, output and reduction applied

System Requirements:
– macOS: 11.0 or higher (Intel & Apple Silicon Native)
– Windows: 10/11 (64-bit)

Visit Developer Site

Ceiling.Fan.1.0.0  ( 30 MB )

22 MB

Audio plugin for mixing. YS – Kolobok Clip_ A simple peak limiter with a choice of two modes – clipper and limiter. The link between the input and output parameters makes it possible to use it as a saturator.

Visit Developer Site

Kolobok.Clip.1.0.0  ( 22 MB )

11.2 MB

A powerful and flexible spectrum analyzer for modern audio production.

Mid/Side · Left/Right · Transient/Tone
Multiple analysis modes in one view.

Component monitoring
Isolate and track signal components.

Sidechain comparison
Compare main and reference signals.

Goniometer & correlation
Phase and stereo field visualization.

Oscilloscope
Real-time waveform visualization.

From sound design to mixing and mastering — gFractor gives you precise visual feedback and deep insight into your audio at every stage of the workflow.

Switch between Mid/Side, Left/Right, and Transient/Tone analysis to explore your signal from any angle. Monitor individual components — isolate transients from tonal content, or hear the mid and side channels in complete separation.

Visually compare your main signal against a sidechain reference — instantly revealing spectral relationships between tracks. Swap main and sidechain with a single key press for rapid A/B analysis without breaking your flow.

Comprehensive stereo visualization in one place: a goniometer for phase and imaging, a correlation meter for mono compatibility, and stereo width broken down per octave — so you know exactly where your width is coming from and where it isn’t.

Capture any Peak Hold curve as a reusable target and save it to a file. Load it back in any session to compare against your current track — perfect for matching tonal balance across mixes or checking a master against a reference.

Visit Developer Site

gFractor.1.0.6  ( 11 MB )

27 MB

The Ultimate Free Monitoring Tool. Professional monitoring and metering for mixing, mastering, and broadcast delivery.

Momentary, Short-Term, and Integrated LUFS metering with ITU-R BS.1770-4 K-weighted filtering and gated measurement.

ITU-R BS.1770-5 compliant true peak measurement using 4x polyphase oversampling with the official 48-tap FIR filter.

L/R Swap, Mono, Side, and Difference modes with click-free crossfading for stereo analysis and mono compatibility checks.

Visit Developer Site

BM.1.0.1  ( 27 MB )

14 MB

FeenstaubHDR – High Dynamic Range Stereo Bus Processor

At a Glance
Mixing music is essentially about adjusting and balancing audio in three dimensions: Its timbre, its dynamic structure and its appearance in the stereo field. The FeenstaubHDR audio plugin takes advantage of effects in all three dimensions that add up to a very consistent, pleasant and musical-sounding finishing. It works best on complex full program stereo material but also shines on vocals, single instruments as well as the drum bus.

You are here: Home / Audio FX Plug-Ins / FeenstaubHDR released
FeenstaubHDR released
October 1, 2025 by Variety Of Life 6 Comments
FeenstaubHDR – High Dynamic Range Stereo Bus Processor

At a Glance
Mixing music is essentially about adjusting and balancing audio in three dimensions: Its timbre, its dynamic structure and its appearance in the stereo field. The FeenstaubHDR audio plugin takes advantage of effects in all three dimensions that add up to a very consistent, pleasant and musical-sounding finishing. It works best on complex full program stereo material but also shines on vocals, single instruments as well as the drum bus.

Applications
As a stereo bus processor the device optimises highly complex dynamics, whether on the mix bus or during mastering.

Manage complex dynamic audio with a seamless blend of compression, expansion and saturation that always preserves punch and energy.
Balance tonality and stereo imaging with authentic Variable-Mu and Glue compression in a split-band and mid-side configuration.
Apply pleasant sonic textures and flavours, and refine them using dynamic equalising.

All details can be found in the

Requirements
Windows VC Redistributable package for Visual Studio 2022 needs to be installed. If it is not yet installed on your system, just download and install it directly from Microsoft.

Visit Developer Site

FeenstaubHDR.1.0  ( 14 MB )

172 MB

Not everyone works in a perfectly treated control room. Many mixes are created in bedrooms, home studios or on the go – with limited budgets and imperfect acoustics.
HEADPHONE LAB solves this problem.

Visit Developer Site

HEADPHONE.LAB.1.0.0_WIN  ( 97 MB )

HEADPHONE.LAB.1.0.0_MAC  ( 72 MB )

12 MB

KNOCK Clipper is a premium quality, user adjustable hard & soft clipper designed by DECAP. It is the CLIP module from his acclaimed plugin, KNOCK. It is inspired by the signature sound of his popular drum kit series DRUMS THAT KNOCK, which has helped shaped the sonics of modern music.

Push your drums hard without ever going above 0db to give your drums a warm, aggressive tone reminiscent of pushing vintage analogue gear into “the red”. Select a harder clip curve for a more aggressive tone, or a softer clip curve for a rounder tone. KNOCK Clipper has an optional high quality mode to enable oversampling.

-Exact clipper from DECAP’s acclaimed plugin, KNOCK
-User adjustable hard / soft clipper
-Lightweight on the cpu
-Easy to use
-Never go above 0db

Visit Developer Site

KNOCK_Clipper_1.0.5_Rev2_WIN  ( 3 MB )

KNOCK_Clipper_1.0.5_Rev2_MAC  ( 8 MB )

24.8 MB

Ultra Low Latency Limiter. Ultra low-latency brickwall limiter for artists, producers, mixing/mastering, and broadcast.

Selectable lookahead with 0.5ms, 1ms, and 2ms modes. Low enough for real-time tracking, live streaming, and monitoring without losing your feel.

LOUD for maximum impact, CLEAN for transparency, SMOOTH for glue, and SAFE for zero-artifact peak control. Each with uniquely tuned attack ramps and release behavior.

ADAA (Antiderivative Anti-Aliasing) band-limits the gain envelope to reduce harmonics at the threshold, while 2x/4x oversampling catches inter-sample peaks for cleaner, more accurate limiting.

Visit Developer Site

BMZ.1.2.0  ( 24 MB )

2 MB

LUveler is a loudness and dynamics modification plugin compatible with the ITU-R BS.1770 specification. It provides a precise reduction of the dynamics and works as transparently as possible to maintain the sound quality even under heavy use of its compressors and limiters.

This allows a wide range of applications, such as matching dynamic material produced according to the EBU R 128 to a much louder platform. Or the automatic leveling of a podcast. Or simply increasing or decreasing loudness without changing the dynamic range.

High-quality true peak limiters avoid exceeding the maximum level.
The LUveler plugin was developed for the use in an automated environment using the LADSPA API. A VST version for Windows has been added. Porting it to other platforms and operating systems, such as MacOS, is not planned!

Short explanation of the parameters:

Features:
Supported Samplerates: 8 kHz – 192 kHz
Latency: 35.375 ms

Visit Developer Site

LUveler_v1_13  (  MB )

LUveler_v1_15 WIN Linux  (  MB )