1.31 GB

Unirock Cherry LPS is a clean-DI, physically modelled dual-humbucker electric-guitar instrument for Windows VST3 and Standalone.

Installation
Run Pro2Max_Unirock_Cherry_LPS_Setup_1.0.0.exe and select a folder for the sample library when prompted. The installer records that location for both the VST3 and Standalone editions, so the library can live on any drive.

Use
Load the VST3 in a 64-bit Windows DAW, or launch the included Standalone application.
Select pickup position with keyswitches: C-1 Bridge, C#-1 Both, D-1 Neck.
Select articulations with C0-G#0. Pick scrapes use F#-1 (short) and G-1 (long).
The Settings panel contains output trim, Auto Sustain, articulation controls, and MIDI pitch-bend range.
The hybrid sample library is used where its rendered state matches the performance. Dynamic playing, alternate pickup states, note releases, pitch bend, slides, and unavailable sample variations remain on the physical engine.

Requirements
Windows 10 or later, 64-bit VST3 host, and at least 1.5 GB of free space for the sample library.

Visit Developer Site

Unirock.Cherry.LPS.1.0.0.part1  ( 700 MB )

Unirock.Cherry.LPS.1.0.0.part2  ( 630 MB )

143 MB

The official, free NAM plugin for guitar and bass. Plug in and play the world’s largest library of Neural Amp Modeler (NAM) captures and impulse responses (IR’s) of amps, pedals, rigs, cabs and more. Use it in your DAW or as a standalone app with no DAW required.

TONE3000 Plugin is an open-source guitar and bass amp-sim plugin and standalone app built around the TONE3000 library of Neural Amp Modeler captures and impulse responses. Rather than building a fixed collection of modeled amps, it lets you browse and play community captures of amps, cabinets, pedals, full rigs, and outboard gear directly in a DAW or without one.

The main appeal is turning a large NAM library into an immediate auditioning workflow. You can stack NAM A2 captures and IRs in any order for a complete signal chain, then keep favorite combinations organized without the usual manual file-download and folder-management routine.

TONE3000 also has deeper routing and tone-shaping tools than a basic profile player. Stereo mode supports dual chains, branching, panning, auto-align, and auto-balance, while Spread can widen a mono chain; pre- and post-block parametric EQ plus global EQ make it practical to shape a capture in the same window.

For recording work, the plugin includes calibration for matching an interface input to calibrated captures, per-block normalization, oversampling, MIDI mapping, and a tuner. It is a particularly strong fit for players who want to move quickly from clean amp-and-cab captures to layered stereo rigs, while retaining the option to work offline with already downloaded models, IRs, chains, and presets.

Visit Developer Site

TONE3000.0.0.7  ( 143 MB )

20.8 MB

Recorded fingerstyle but the song wants a pick? Picking Fingers voices a bass DI the other way: pick from fingers, or fingers from pick. The change comes from measured recordings of the same basses played both ways, plus a matching transient stage, so it reads as a playing style, not an EQ preset. Dial the bite, tilt the tone, done.

Picking Fingers is a zero-latency bass processing plugin designed to transform the playing character of a recorded bass between fingerstyle and pick. Built from matched recordings of real bass performances, it uses precision voicing filters to change the tone and attack while preserving the weight of the low end.

Choose your preferred playing character with the Voice control, shape the measured per-note response with Attack, and use Bite to add gritty definition to the front of each note without affecting sustained tones. A ±6 dB Tone control provides additional tonal shaping, while input and output trims make level matching easy. With zero-latency processing and mono or stereo operation, Picking Fingers can be used while tracking or during mixing.

What Picking Fingers offers
– FINGERS voices a picked DI signal as finger-style
– PICK voices a finger-style bass DI signal as picked
– BITE adds measured attack grit to each note front
– TONE is a gentle plus/minus 6 dB tilt, bit-exact flat at 0
– IN and OUT trims

Visit Developer Site

Picking.Fingers.1.0.0  ( 21 MB )

44 MB

A JUCE implementation of Steven Atkinson’s NeuralAmpModelerPlugin.
Steven Atkinson’s Neural Amp Modeler is an amp profiler based on the Neural network emulator for guitar amplifiers.
Supported Formats
VST3
AU
Standalone Application

Visit Developer Site

nam-juce-v0.5.0  ( 44 MB )

83 MB

The ultimate free amp sim.
Play iconic amps with the most accurate modelling available.
NAM Rig uses Neural Amp Modeler technology to replicate the exact sound and feel of real amps, pedals and cabs.
Drag-and-drop your own NAM files or choose from thousands of free models on Tone3000 – without leaving the plugin.

In Partnership with
TONE3000
Free access to over 500,000 models. Built-in.
Tone3000 is a rapidly growing collection of amp profiles shared by users.

NAM Rig let’s you easily browse & search the Tone3000 library and load any amp, pedal or cab with a single click.

Save your favorites and create your chains as presets.

Model your own gear on TONE3000 and play them directly inside NAM Rig.

Amp previews

Hear NAM Rig in action.
Switch between captured amps while the take stays locked.

Plugin or standalone

NAM Rig runs as a plugin in your DAW or as a standalone app for quick plug-and-play jamming.

VST3
AU
AAX
macOS
Windows

START PLAYING TODAY.
Free. Accurate. Unlimited.

Visit Developer Site

NAM.Rig.1.0.0.WIN  ( 51 MB )

NAM.Rig.1.0.0.MAC  ( 56 MB )

23.1 MB

Burning Stones is a fictional high-gain desert amp plugin built for sag, speaker weight, rough cabinet character and guitar tones that react under your fingers.

Push the input and the amp starts to compress, bend and collapse. Keep the power controlled for heavier sag, or open it up for more final-stage push. Choose between five built-in cab voices, from cleaner cabinet texture to heavy doom room weight.

Burning Stones is made for guitar tones that feel physical, dusty, heavy and alive.

Main features
– High-gain desert amp character
– Reactive sag and power-stage feel
– Five built-in cabinet voices
– Input, Gain, Power and Output gain structure
– Bass, Mid and Treble tone section
– Amp Response / Feel control
– Factory presets
– User presets
– A/B/C temporary snapshot slots

Cabinet voices
Burning Stones includes five built-in cab types. No external IRs are required.
– Main 57+121
– Bright 57
– Doom Room
– Doom Bloom
– Doom Edge

Visit Developer Site

Burning.Stones.1.0.1  ( 23 MB )

208 MB

All In One Mixing Suite

Mix Locker is our all-in-one solution that seamlessly integrates into your recording setup, enabling you to quickly find the best sound for your mixes.

Shape your sound with a vast selection of virtual studio gear, opening up almost endless avenues for musical creativity. Immerse yourself in the tones of iconic studio gear recreated in the digital realm

Features
• Freely Adjustable Modules
• Per Module Linear Phase Oversampling
• Per Module Stereo/Mid-Side Configuration
• Per Module Gain Controls
• Per Module Metering
• Zero Latency (when not oversampling)
• Preset Notes
• Resizable Screen

HOME

MixLocker-v1.0.2  ( 199 MB )

1 GB

Place mics, mix speakers and export unlimited .wav IRs.

The Future of Guitar Tone – MIKKO is the most sophisticated guitar cab sim in the world. Now powered by our cutting-edge Reflex format, it delivers a full-range and mix-ready tone with a flat response. Traditional guitar cabs are not optimized for miking up and it has become common practice to rely on post-processing guitar tones and accepting the flaws in guitar cabinet designs. MIKKO Reflex maximizes the unfiltered tonal character of amazing guitar speakers in a neutral guitar cab designed by Paul Gough (Zilla Cabs) that is optimized for miking up.

MOVE MICS IN 3D SPACE
With MIKKO Reflex you can realistically place mics 360 degrees around the speaker while controlling the distance from the cap to edge or pulling the mics back to combat proximity effect or tilting the angle of the mics for a phasier character.

EXPORT .WAV IR’S
Make your own high quality impulse response collection for personal use that is compatible with all hardware that supports .wav format IRs. Choose the correct format that suits your modeler and use minimum phase transform to ensure that you can also mix these IRs with most other IRs.

EQ BALANCE
MIKKO features an amazing EQ balance section that lets you visually analyse and EQ your mic-up and save it as part of your exported IR.

Free version provides with one speaker and four microphones.

HOME

ML-Sound-Lab-MIKKO-Reflex-3.0.6-Win  ( 1 GB )

ML-Sound-Lab-MIKKO-Reflex-3.0.6-Mac  ( 1 GB )

271 MB

Amped Roots 2.0 is made in collaboration with our good friend Ryan “Fluff” Bruce and the sims featured are the best amps from Fluff’s personal collection. This plugin runs ML Sound Lab’s Vorna Amp Modeling, indistinguishable from real tube amplifiers.

3D CAB SIM

Amped Roots features a 3D cabinet simulator that allows you to mix and match cabinets to dial in your tone. You can move the mics from the middle to the edge of the speaker, front or back and even angle mics to get a beefier sound. Choose from 3 cabinets: Mega Oversize, Freeman V30 and Freeman M25 with 4 microphone options or load in your own IRs.

Pedalboard

Amped Roots 2.0 features a pedalboard with high quality effects pedals and studio effects.

Included pedals:

• Noise Gate
• Compressor
• Drive Pedal
• Chorus
• Analog Delay
• Reverb

Standalone

Amped Roots 2.0 comes with a standalone program that is MIDI controllable and stage ready.

Tuner

The latest Amped platform includes a reliable and precise guitar tuner section.

NEW AMPED FEATURES
This plugin runs on our latest Amped engine that includes a reliable tuner, MIDI capabilities and a standalone app making it extremely versatile.

HOME

ML-Sound-Lab-Amped-Roots-2.0.0  ( 271 MB )

12.6 MB

Dusty Tube is a guitar and bass amp simulator plugin built on NAM, an open-source project that uses deep learning to create highly accurate models of amplifiers and pedals.

Designed with simplicity and inspiration in mind, Dusty Tube combines the power of NAM with a vintage-style interface and a carefully curated set of features. All controls are accessible on a single page, creating a nostalgic, familiar environment that’s easy to use and inspiring to play. As a guitarist and enthusiast of GUI design and programming, I created Dusty Tube to contribute something useful to the guitar community. It’s free to download.

HOME

dustytube_1-0-3  ( 12 MB )